The Traxxas Slash is arguably the most popular short course RC truck on the market. It is a fast, nimble, and tough RC truck that is great for beginners and experts RC drivers. But what Scale is the Traxxas Slash?
The Traxxas Slash is a 1/10 scale short course race truck. However, Traxxas also has a smaller version that is a 1/16 scale truck.
In this post we will cover all the specifications about the Traxxas Slash so you can get a sense of how big this truck really is. Lets dive in!
How Big Is The Traxxas Slash?
The Traxxas Slash comes in two configurations. The smallest model you can by is a 1/16 scale truck and the largest model is a 1/10th scale truck.
When you place the two trucks side by side, the 1/10 scale Slash looks HUGE compared to the smaller 1/16 scale model. The 1/16th scale Traxxas Slash is a little bit larger than a football. You could easily hold it with one hand while the 1/10 scale Slash required both hands to pick it up.
1/10 Scale Traxxas Slash Dimensions and Weight
The larger 1/10 scale Traxxas Slash has the following dimensions and weight:
- Length is 23.36 inches (568 millimeters)
- Front and rear track is 11.65 inches (296 millimeters)
- Wheel Base is 12.75 inches (324 millimeters)
- Height is 7.60 inches (193 millimeters)
- Weight is 5.818 pounds (2.639 kilograms)
As you can see from the specs, the 1/10 Scale Traxxas Slash is a large RC truck. Its about 23.3 inches long by 11.6 inches wide by 7.6 inches tall.
In other words, the Traxxas Slash 1/10 scale is 23.3″ L x 11.6″ W x 7.6″ H.
And in metric units, The Traxxas Slash 1/10 scale trucks is 568mm L x 296mm W x 193mm H.
This model of the Slash comes in two wheel drive and four wheel drive. You can also buy this truck with a brushed or brushless motor.
the four wheel drive model comes with a brushless motor and ESC and will cost more than the two wheel drive brushed version.
Both are great trucks, but we recommend the four wheel drive VXL Slash if you can afford it.
1/16 Scale Traxxas Slash Dimensions and Weight
The smaller 1/16 scale Traxxas Slash has the following dimensions and weight:
- Length is 14 inches (356 millimeters)
- Front and rear track is 7.3 inches (185 millimeters)
- Wheel Base is 8.1 inches (206 millimeters)
- Height is 4.92 inches (125 millimeters)
- Weight is 2.187 pounds (0.99 kilograms)
When you compare the the two Traxxas Slash dimensions, you can start to get a picture of how small the 1/16 scale version is.
The 1/16 scale Traxxas Slash about 14 inches long by 7.3 inches wide by 4.92 inches tall.
Or, the Traxxas Slash 1/16 scale is 14″ L x 7.3″ W x 4.92″ H.
In metric units, The Traxxas Slash 1/16 scale trucks is 356mm L x 185mm W x 125mm H.
The 1/16 scale Slash is almost 60% shorter in length, 65% shorter in height, and 37% lighter than the larger 1/10 scale Slash. That is a big difference if you are looking for a truck that on the smaller side!
Unlike the larger Slash, the 1/16 scale Slash only comes in a four wheel drive configuration and a brushed motor.
Which Traxxas Slash Should I Buy?
If you are looking for a entry level RC truck that is smaller and less expensive, you should look at buying the 1/16 scale Slash. This vehicle will be cheaper to maintain and operate. The brushed motor will be cheaper to replace if it wears out compared to the brushless motor on the 1/10 scale Slash.
The 1/16 scale Slash also comes with a battery and charger. That is a lot of money saved right there. This smaller Slash also runs on NiMH batteries which tend to be cheaper than LiPo batteries.
On the other hand, the 1/10 scale Slash is geared to more serious drivers. The larger frame makes it a better option for off road driving and bashing. You can also hit large jump with the 1/10 scale Slash because the suspension is setup for short course racing. I don’t recommend hitting big jumps with the 1/16 scale Slash because it suspension isn’t set up for that type of driving.
If you are looking to drive over rougher terrain, hit jumps, and race on a track, the 1/10 scale Slash is the better option.
I think the larger model Slash is an amazing truck. It is really fast and can hit speeds up to 60+ miles per hour if you get the brushless version. I was blown away by the Slash the first time I drove it.
What Scale Is The Traxxas Slash Conclusion
As you can see, the 1/16 scale Traxxas Slash is a great model for entry level drivers. It is a great first RC truck. The 1/10 scale Slash is much larger, has better suspension, and can reach higher maximum speeds. For those reasons, I think the 1/10 scale Slash is better for drivers that want to push the limits of the truck. Both are great vehicles and will be a ton of fun to drive. All you have to decide is how rough do you want to get with your truck?
If you are driving on paved surface or around your neighborhood, the 1/16 scale will be a great truck. If you want to bash in the mud and dirt or hit jumps, pay a little extra for the 1/10 scale model.You won’t be disappointed!
Happy driving!
What Scale Is The Traxxas Slash FAQs
Which Traxxas Slash Model is The Biggest?
The 1/10 Scale Traxxas Slash is the larger of the two models available. The 1/16 scale Traxxas
Slash is about 60% smaller than the 1/10 scale 4S model.
Which Traxxas Slash Model Is The Cheapest?
The 1/16 scale Traxxas Slash is the most affordable model on the market. The 1/16 Slash is smaller, weighs less, and has smaller wheels than the larger 1/10 scale version
